Communication

Description

The communication solutions from Bender allow rapid information exchange of the devices as well as retrieving data and the system status via the web server. In this way, the entire installation can be monitored at a glance. Visual processing of the data makes it easier to identify trends.

Frequently, installations cannot be monitored appropriately with one single measuring point. Several measuring points are required, which have to be adjusted to the system structure. Gateways ensure seamless interconnection, condition monitoring as well as processing of the data for the evaluation software.

 

Examples of Application:

Commissioning wizards
The wizards support the user in generating dashboards and reports. With just a few steps, meaningful dashboards related to a specific subject of electrical safety can be generated.

Residual current
The commissioning wizard supports you in creating a dashboard that allows evaluating the level of the residual current at a glance. The ratio of residual current and load current is calculated.

Stray currents
The wizard for stray currents indicates the system parts where excessive stray currents exist.

Central earthing point
The central earthing point wizard generates a meaningful visualization for the user by querying the current at the CEP and the corresponding phase current.

Neutral conductor
The excessive load on the neutral conductor challenges many system operators. The commissioning wizard evaluates the neutral currents and indicates whether they are too high.

Monitoring and parameter setting of all Bender products that support communication

Mounting in the control cabinet door so that all information is immediately visible

Commissioning and diagnosis of Bender systems

Remote diagnosis and remote maintenance

Control stations in all areas

Monitoring and analysis of data centers

Remote display of the latest measured values, status/alarm messages and parameters

Gateway to Modbus TCP: Reading the latest measured values, status/alarm messages from addresses 1…10 of each interface via Modbus TCP

Ethernet interface with 10/100 MBit/s for remote access via LAN, WAN or Internet

Setting for internal parameters and for configuration of Bender universal measuring devices and energy meters

Time synchronization for all assigned devices

History memory (20,000 entries)

Data loggers, freely configurable (30*10,000 entries)

50 data points from third-party devices (via Modbus RTU or Modbus TCP) can be integrated into the system

A virtual device with 16 channels can be created No reports can be generated – not even for your own device.

Usage of professional visualization programs by converting BMS data to Modbus/RTU protocols.

Observing and analyzing Bender products that support communication, such as RCMS, EDS and MEDICS® systems.